|
The Bellevue funicular ((フランス語:funiculaire de Bellevue)), in Meudon, Hauts-de-Seine department, was from 1893 to 1934 a funicular running from the Bellevue-Funiculaire station〔This stop was created in 1893 for interchange with the funicular. 〕 on the Coteaux line (today, ''Brimborion''), to the Gare de Bellevue, on the Paris–Brest railway line. == Description == The line, designed by the engineers Guyenet, Madamet and Tinel, was of single track rising . After being permitted to cross the Coteaux line, the lower station was raised to connect with the route from Vaugirard (Bas Meudon), thus requiring passengers to climb a staircase, clearly seen on the left of the station. With a constant gradient of 16° 56' (about 30%), it was entirely built on a viaduct of twelve metal sections, resting on five lattice pillars and two masonry abutments with a foundation of solid brick. A passing loop was provided in the middle of the route. The Vignole rails weighed , at a track gauge of . Safety brakes were provided by a rack rail. Traction was provided by two fixed steam engines, though only one was used in normal conditions. The cabins were attached by herringbone gears to cables wound on drums of diameter, moving at a speed of ,〔 one drum winding and the other unwinding, to haul a cabin of 59 passengers. The weight of the ascending carriage would be partly counterbalanced by that of the other descending. The journey took between one-and-a-half and two minutes.〔 Operation needed at least four people: two drivers (one for each car), a mechanic and a boilerman for the steam engine.〔 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Bellevue funicular」の詳細全文を読む スポンサード リンク
|